If you seeking special discount you need to searching when special time come or holidays. Typing your keyword such as 1911 Extended Ambidextrous Thumb Safety Wilson Combat 1911 Extended Ambidextrous Thumb Safety Wilson Combat Reviews : Best Price!! Where I Can Get Online Clearance Deals on 1911 Extended Ambidextrous Thumb Safety Wilson Combat Save More! I urge you to send for our free brochure. 1911 Extended Ambidextrous Thumb Safety Wilson Combat looking for special discount
Gracefully curved, grooved, extended safety for the 1911 and its copies makes this fine gun even better. Left and right handers benefit from the extra length - it's easier to find and release - while the ambidextrous feature makes "weak hand" shooting simpler. Beautifully contoured and finished, a first class addition to any 1911. Slightly oversized sear stud allows precise gunsmith fitting.
SPECS: 3/16" (4.8mm) wide x 1" (2.5cm) long left side contact area, 1/8" (3.2mm) wide x 1" (2.5cm) long right side contact area. Blued or stainless steel.
New-design safety blocks the trigger, not the sear. There’s no way to move the trigger when it’s on safe, virtually eliminating the risk of accidental sear release when you take it off safe. Right-hand (RH) and left-hand (LH) models available, both with a 3⁄8” wide, grooved trigger shoe that improves feel and control. Choose a Straight shoe preferred by some benchrest shooters for its more precise finger contact. Adjustable, 11⁄2 to 4 lb. weight-of-pull, creep and backlash. Fully assembled to save time and labor. Includes bolt release.
The GEMTECH Suppressed Bolt Carrier is a drop-in replacement and will allow the shooter to choose between suppressed (S) and unsuppressed (U) settings without any permanent modifications to the firearm. No longer will you need to change gas blocks, buffers, or any other components. Not only that, but with the GEMTECH Suppressed Bolt Carrier, there is a reduction in carrier speed and less felt recoil, bringing the cyclic rate of the suppressed rifle down to unsuppressed levels. And in some systems, testing has shown that it can actually bring it LOWER than unsuppressed levels.
Ghost’s Bullet Slide Release (BSR) for Glock® is an extended control that helps you engage in fast, positive operation of the slide release under stress. The biggest benefit of the BSR is its oversized control pad because a larger surface is easier to hit, making release of the slide possible even when your finger doesn’t come down square on the button.
The Ghost Bullet Slide Release’s extra-large control pad is contoured and streamlined so it does not present an extra risk for snagging on clothing or other gear during a draw from holster.
Ghost developed the Bullet FORWARD version of the BSR for shooters using the modern "thumbs forward" shooting technique. The Bullet Forward Slide Release has the control pad moved forward, thus getting it out of the way so your thumbs do not accidentally push the release UP while shooting and lock the slide open before the mag is empty. If your thumb stance is a little different, it will also help keep you from accidentally pulling the release DOWN and preventing the slide from locking open on the last round.
All versions of Ghost’s Bullet Slide Release are easy to install in your Glock®. They drop right into your pistol, replacing the factory release with no other permanent modifications to the gun.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
Complete AR-15 Lower Parts Kit ready for installation in your lower receiver. Standard AR-15 components.
Parts List includes:
SPECS: Fits - AR-15 standard lower receivers.
State-of-the-art, Cerakote™ Firearm Coatings provide a durable, weather- and corrosion-proof, ceramic-based protective finish that resists scratching, chipping, and abrasive cleaning solvents. Hardener and paint chemically bond into an ultra-thin coating that adheres to almost any surface for a clean, professional finish. Apply with your airbrush or HVLP touch-up gun for a smooth finish. Air Dry requires no baking and is tack free in 40 minutes, completely dry in 24 hours, and fully cured in 5 days.
Items cannot be shipped to New Zealand or Australia.
SPECS: Air Dry Kit - Premixed and includes 4 fl. oz. Cerakote, (4) funnel filters, and instructions. Finishes up to 6 handguns or 2 to 3 long guns.
The world-famous, ultra-thin, friction-reducing coating that lasts and lasts can now be applied to any clean, pre-heated metal part in as little as 2 hours without the extra expense of owning an air brush. Brownells has teamed up with KG Products to produce the genuine GUN-KOTE epoxy finish in a convenient aerosol that’s every bit as easy and foolproof to apply as our other, great, bake-on, gun finishes.
Now you can easily apply the self-lubricating benefits of molybdenum disulfide to alloy steel, stainless steel, brass and aluminum, even properly prepared nickel plating, in just minutes. Prepare, clean and pre-heat your part to 100°, spray on Brownells GUN-KOTE and allow the part to dry. Bake the part in an oven at 325° for one hour and you’re done. You’ve protected the metal parts of your valuable firearm from rust, corrosion, and scratches with a beautiful finish that will wear for years and help keep your gun looking just like new.
Brownells GUN-KOTE is a durable, second-generation epoxy, thermo-set resin finish that will not break down, peel or dissolve. In fact, once it’s applied, the only way to remove Brownells GUN-KOTE is to abrasive blast the part. It is resistant to all known gun solvents and thinners. Each coat is approximately .0004" thick so Brownells GUN-KOTE can be used on both internal and external parts where a close-tolerance fit is required without having to worry about interference. This makes Brownells GUN-KOTE the perfect, maintenance-free coating for handgun slides and frames, shotgun receivers and magazine tubes, rifle actions and bolts, anywhere you need an ultra-thin, self-lubricating, permanent coating that protects and wears like crazy.
Brownells Guntechs recommend use of 084-179-004 All Purpose Clean Out Nozzle prior to attempting to spray this product.
SPECS: Aerosol - 6 oz. (170 g) weight.
Features a friction locking mechanism that eliminates movement between the buffer tube and buttstock for a solid “feel” when mounting rifle to shoulder. Heavy duty, spring-loaded hand lever allows fast length-of-pull adjustments. Nylon polymer body provides maximum impact and heat resistance, with molded-in reinforcements at stress points. Accepts a variety of ambidextrous sling attachment options, including web slings and single-point, push-button sling mounts. Comb contour is wider than standard issue M4 stock to help shooter maintain a solid cheekweld. Synthetic rubber buttpad increases comfort and helps prevent slippage. Fits buffer tubes that accept both four- and six-position collapsible stocks. Buffer tube, carbine buffer, receiver extension nut, and carbine-length action spring not included. Available in Black, O.D. Green or Gray, so you can match the color of your stock to your tactical rifle's color scheme. Commercial fits larger diameter 1.17" O.D. commercial buffer tubes.
SPECS: Impact-resistant nylon polymer, Black, O.D. Green or Gray. LOP adjustment range, 3½" (8.9cm). Commercial - 71⁄8" (21cm) OAL, 5¼" high. Fits 1.17" O.D. commercial carbine buffer tubes.
Looking to get a bit more control over your 9mm Glock handguns? Want faster follow-up shots? Adding an Agency Arms 417 Compensator to your Glock Gen 3 or 4 handguns enables owners to do more with their guns, thanks to a unique design.
Machined from 7075 aluminum, the Agency Arms 417 Compensator fits all Gen 3 and Gen 4 models of the Glock G17, G19 and G34. The muzzle device features a two-chamber design, featuring two vertical ports as well as two ports that vent off to the side. Options are available with both black and gold finishes.
For installation, the Agency Arms 417 Compensator ships with the set screws needed, and owners can continue using their OEM recoil-spring assembly. The device requires a threaded barrel with a 1/2-28 TPI thread pitch. Another added features of the Agency Arms 417 Compensator is a machined hole compatible with all Glock front sights, allowing users to enhance their sight radius.