Shop for Best Price Saf-T-Round Safe Tech .Price Low and Options of Saf-T-Round Safe Tech from variety stores in usa. products sale.
"Today, if you do not want to disappoint, Check price before the Price Up.Saf-T-Round Safe Tech You will not regret if check price." cheapest Saf-T-Round Safe Tech
Bright, international orange tab gives clear indication of weapon condition. Provides the user, range safety officer and bystander alike with a visual and physical method of determining that a firearm is safe. Machined, brass case head lets you rapidly work the action and eject the Saf-T-Round. Molded from heat-resistant nylon polymer to provide lasting durability; won't deform after repeated use.
SPECS: Nylon polymer, international orange, brass head. Sold as one per pack.
Battle Arms Development’s Rigidrail M-LOK Handguard is designed to give you just the right balance between weight, strength, and accessory mounting versatility. Its open, skeletonized configuration enables fast, thorough dissipation of barrel heat, even during long rapid-fire operations (but you’ll probably want to wear gloves!).
M-LOK slots at 3, 6, 9 and 12 o’clock positions open up plenty of accessory mounting options. Short Picatinny rail sections positioned along the top at the front and rear give you mounting points for backup sights or other accessories.
The Battle Arms Development Rigidrail M-LOK Handguard allows the barrel to free-float, so it will not apply any accuracy-compromising stress to the barrel.
With a generous 1.315" I.D., the Battle Arms Development Rigidrail M-LOK Handguard has clearance for most low-profile gas blocks and will not make contact with the gas tube. It even has a tapped hole at the 6 o'clock position on the forward underside for mounting a bipod or additional sling attachment point.
Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" Nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action; Brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is .165" diameter Nylon tip without steel pin which is non-marring used for removing trigger plate pins from 870, 1100 and 1187. Single replaceable non-marring nylon punch with .165 diameter used for removing trigger plate pins from 870, 1100 and 1187. Supplied as: Basic Set with two 5/16" diameter tips (one Nylon, one Brass) and one Handle. 4-Way Set includes four Handles, one 5/16" Nylon Tip; plus one each, 3/16", ¼" and 5/16" diameter Brass Tips. 6-Way Set adds ¼" and 5/16" diameter, Aluminum Tips and 2 more handles to the 4-Way Set.
SPECS: Handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1¼" (3.2cm) long.
The Pistol Viper Bore Snake is a braided nylon, pull-through cleaning cord that scrubs, cleans, and lubricates in a single step. The Pistol Viper is just like the original Bore Snake, with 50% more scrubbing surface for those extra-tough cleaning jobs.
Simply apply bore cleaner to the front of the cord, oil to the end, drop the weighted end down the bore, and pull through. The cone-shaped, nylon bore guide on the lead end protects your gun’s rifling. Extra, built-in bronze brushes and braided cord clean and oil the bore in a few passes. Washable and reusable with "den" case for storage.
The HD Night Sights were specifically created to address the needs of tactical shooters. The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting. Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation. The HD Night Sights are designed to shine—even in the most demanding conditions. Green tritium lamps are warranted for 12 years from date of manufacture.
Set Screw Not Included
Achieve awesome ballistics with new Reloder® 26 from Alliant Powder®. The propellant's burn speed falls between that of Reloder® 22 and Reloder® 33, and it incorporates EI® technology to produce extremely high velocities in magnum cartridges. Reloder 26 has a high bulk density that allows larger powder charges, and it provides a consistent, controlled response to temperature changes.
Rugged, all-steel, high-capacity magazines for 9mm AR-15 conversions that use a Colt-style magazine. Metal follower won’t distort under a full load and aids smooth, reliable feeding. Hold-open feature works with ARs fitted with hold-open on the conversion block. Easy-to-remove floorplate makes disassembly fast and simple. Fits Colt and Rock River conversions with a lower receiver conversion block.
SPECS: Steel, dark gray (32 round).
Our Brownells BRN-10 Retro Slip Ring replicates the contour of the slip rings used on early M16 rifles, so it’ll add an extra touch of period authenticity to your next "retro" AR-style .308 build. Just combine the BRN-10 slip ring with a .308 barrel nut, handguard spring, and snap ring to add the correct handguard retention hardware to your barrel.
The “flat” exterior of the Brownells BRN-10 Retro Slip Ring enables the use of non-free-float drop-in handguards on your .308 AR.
The AAC 7.62-SDN-6 is a compact fast-attach sound and flash suppressor for 7.62x51mm and 300 AAC BLACKOUT (7.62x35mm) weapons. It is 1.25” shorter than the 762-SD and features a fully welded all-Inconel® baffle stack and front end cap to maximize durability on select fire 7.62mm SBRs. The 762-SDN-6 also functions as a superb multi-caliber suppressor for multiple hosts, providing excellent performance on 7.62 NATO, 300 AAC, 6.8 SPC, 6.5, and 5.56mm NATO. When employed on a 300 AAC BLACKOUT, the overall SPL of 126 dB with subsonic ammo is quieter than the 9mm HK MP5-SD.
SPECS: Caliber - 7.62mm NATO, 300 Blackout. Weight - 20oz. Length - 7.66" . Diameter - 1.5". Materials - Inconel® 718 and 316L SS. Finish - Cerakote. Attachment - 51T Ratchet Mount. Reduction 25dB (7.62) 39dB (300BLK).