Buy at this store.See Detail Online And Read Customers Reviews Sparc Ar Red Dot Vortex Optics prices over the online source See people who buy "Sparc Ar Red Dot Vortex Optics" Make sure the store keep your personal information private before you purchase Sparc Ar Red Dot Vortex Optics Make sure you can proceed credit card online to buySparc Ar Red Dot Vortex Optics additionally the store protects your information from fraudulents Make sure the customer support is definitely there to help you when you place Sparc Ar Red Dot Vortex Optics order with them
SPARC® AR RED DOT
Simple—Fast—Effective—Point and Shoot. When you boil it down, those are the advantages of a red dot sight. And that’s what the SPARC AR delivers - all in a durable, lightweight, compact and ultraclean package. Digital rear-facing controls for power and dot brightness offer quick access and are viewable from the shooting position. 2 MOA dot diameter promotes precise point of aim. Automatically returns to last dot intensity used when powered up.
Unlimited eye relief and parallax free, the SPARC AR gets shooters on target fast. Waterproof, fogproof and shockproof for ultimate durability. Unit automatically shuts off after 12 hours to prevent accidental battery rundown and operates using a common AAA battery. Duty rifle - home defense—recreation, the SPARC AR is built to handle all your red dot needs.\
Each kit is tested on a Series 70-style frame to make certain it will produce the specified pull weight with little or no fitting. Parts are wire EDM cut from bar stock, honed and polished, then heat treated for years of service life. All profiles and through-holes are mechanically correct to function without hand fitting. Sear nose has correct relief angle, sear spring is narrowed to reduce pull weight. Exposed hammer edges on Ultra-Light, Super?Match and Tactical II are chamfered to minimize slide drag and clothing wear. Each kit contains a hammer, sear, disconnector, sear spring and hammer spring. ULTRA LIGHT KIT - 3.5 lb. pull weight. Ultra light, skeletonized, hammer; relieved to prevent frame rub. Ultra light match sear and disconnector. Lightened sear spring, 18 lb. hammer spring. ULTRA LIGHT SPEED II KIT - 3 lb. pull weight. Low-profile, skeletonized hammer relieved to prevent frame rub; ultra-light weight cuts lock time to a minimum. Deep, crisp serrations ensure secure thumb contact for fast, positive cocking. Properly matched spring weights give the specified pull weight and ensure positive ignition. TACTICAL II KIT - 4 lb. pull weight. Tactical II hammer with relieved sides, ultra match sear and disconnector, light sear spring, 18 lb. hammer spring. TACTICAL MATCH KIT - 4.5 lb. pull weight. Tactical hammer, sear, disconnector, light pull sear spring, 18 lb. hammer spring. Great for carry guns. WARP SPEED KIT - 3 lb. pull weight. Very low mass hammer, relieved to prevent frame rub. Low mass sear and disconnector, 18 lb. hammer spring, light pull sear spring. DUTY/CARRY KIT - 4½ lb. pull weight for duty or carry pistols. Comes with classic, military-style spur hammer, for those who prefer that style or are required to have it on duty weapons. Includes sear, disconnector, 23 lb. hammer spring, and sear spring. PROFESSIONAL KIT - 5 lb. of pull weight and is designed for military and police shooters. Gives complete trigger control in high-stress situations. Contains hammer, sear, disconnector, 23 lb. hammer spring and tactical sear spring.
SPECS: Ultra Light Kit: Special die steel, in-the-white. Hammer: Rc 50-53. .39 oz. (11.1 g) weight. Sear: .07 oz. (1.9 g) weight. Ultra Light Speed II: Tool steel, in-the-white. Hammer & Sear: Rc 50-55. .7 oz. (20g) total weight. Sear: .07 oz. (1.9 g) weight. Tactical II Kit: Special tool steel, in-the-white, Hammer. Rc 50-53. .5 oz. (14 g) weight. Sear: .09 oz. (2.5 g) weight. Tactical Match Kit: Special tool steel, in-the-white. Hammer: Rc 50-53. .52 oz. (14.7 g) weight. Sear: .09 oz, (2.5 g) weight. Warp Speed Kit: Special die steel, in-the-white. Hammer: Rc 50-53. .35 oz. (9.9 g) weight. Sear: .07 oz. (2 g) weight. Disconnector: .069 oz. (1.9 g). Duty/Carry 4½ lb. Kit: Billet alloy steel, heat treated to Rc 50-54, in-the-white. Hammer, black. Kit includes spur hammer, sear, disconnector, 23 lb. hammer spring, and sear spring. Professional 5 lb. Kit: Billet alloy steel, in-the-white. Hammer, Rc 50-54, .5 oz. (14.1 g) weight. Sear 2 oz. (5.6 g) weight. Disconnector .2 oz. (5.6 g) weight. 23 lb. hammer spring, tactical sear spring included.
The Magpul Bipod is optimized for rapid one-handed adjustments. The bipod quickly and quietly transitions between countless user configurations. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight.
The Magpul Bipod features tensioned legs that stow neatly forward and snap down and lock. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0°, while maintaining full tilt functionality.
A soft rubber bipod locking knob cap is attached to the bipod locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept all Atlas pattern bipod replaceable feet.
Faxon AR-15 5.56 Pencil barrels have a narrow O.D. both fore and aft of the gas block, for maximum weight saving. AR-15 5.56 Pencil barrels are manufactured at Faxon’s ISO-certified facility from one of the hardest materials on the planet, 4150 CMV carbon steel, featuring a QPC black Nitride coating for superior wear-resistance and longevity.
All Faxon AR-15 5.56 Pencil barrel feature M4 feedramps for to aid in reliable chambering and extraction of round, and they must pass magnetic particle inspection to ensure consistent quality.
One of the best elements of the AR-15's flexibility and modularity is the ability of owners to install a one-piece trigger unit to enhance the trigger style and pull on their gun. One of the upgrade options on the market is the Velocity Triggers MPC Drop-In Trigger.
The Velocity Triggers MPC Drop-In Trigger is a single-stage trigger design produced for the utmost in precision shooting and can be had in a variety of different set-ups, all fine-tuned to fit the end user.
The Velocity Triggers MPC Drop-In Trigger can also be ordered in a range of different texture options, including smooth, rounded or serrated to fit user preferences.
Our Generation II Expander Dies completely capture the mandrel within the die so the mandrel cannot pull out. An O-ring in the die cap allows the mandrel to float a bit and find its own center within the case neck. All three Generation II dies are precision machined from stainless steel and the 7/8 inch - 14 dies include the Sinclair Stainless Steel Split Lock Ring. Large caliber expander dies accept only 35 to 50 caliber mandrels. All expander mandrels for Sinclair Expander Bodies are sold separately: Find Mandrels here.
The Geissele Super SCAR trigger is a semi-automatic trigger that Geissele has developed as a retrofit for the FN SCAR 16 and FN SCAR 17. The Geissele Super SCAR trigger is designed to only fit into the standard polymer trigger housing manufactured by FN. The SCAR trigger is a non-adjustable, two-stage trigger but it is not a Match trigger. The Geissele SCAR trigger is ideally suited for Close Quarters Battle (CQB) and mid-range work. Comes with Aeroshell #6 Lubricant.
SPECS: The Geissele SCAR has a total pull weight of about 4.5lbs – 2.5lbs on the first stage and 2lbs on the second stage. The pull weight and sear engagement are not adjustable by the shooter.
As its name indicates, Geissele’s Maritime AR-15 Bolt Catch is designed for use in wet operating environments where the AR-15 user needs an oversized, deeply textured button for positive, first-attempt operation of the bolt release. It’s an excellent upgrade for anybody who needs help making solid contact with the release button under stress or when wearing gloves.
With its aggressively checkered thumb pad, the Geissele Maritime AR-15 Bolt Catch also gives you non-slip contact and positive feedback when manipulating it in the dark or while wearing gloves. The Maritime Bolt Catch’s large surface area is a big help in quickly locking the bolt back and releasing it after a mag change.
With the Geissele Maritime AR-15 Bolt Catch installed, left-handed shooters get a bonus have because they won’t have to break their grip to manipulate the catch thanks. Left-handed shooters can simply use their left index finger to lock the bolt back quickly and efficiently when making magazine changes.
Forged, fully assembled lower is ready for your choice of upper. Precision machined from 7075-T6 aircraft-grade aluminum alloy, mil-spec hardcoat anodized, then Teflon-coated black for superior wear and scratch resistance. Includes mil-spec trigger group. The M4 lower is equipped with a 6-position, collapsible carbine stock made of impact-resistant polymer.